Product Features

• This product is an additional collar receiver for WIEZ Wireless Dog Fence. Note: The pairing method is available in the 2-in-1 version only. If your Wiez wireless dog fence is not the 2-in-1 version, you can use the extra collar receiver directly without pairing (transmitter and collar receivers will be automatically paired, no manual operation is required)
• ★ After pairing, the transmitter can control multiple dogs simultaneously in fence mode. If one or two dogs leave the set range, the transmitter will only give sound reminder and electrostatic shocks to the corresponding dog, and will not affect other dogs in the set range.
• The transmitter of the 2-in1 version can control up to three dogs at the same time. You can choose to buy one or two additional collar receivers according to the number of dogs in your home.
• How to match extra collars with transmitter: 1st, Turn on both transmitter and receiver. 2nd, Press and hold the “MODE” button of the transmitter. The number on the LED screen will blink and the receiver light will flash and make a beeping sound. 3rd,Select 002 (or 003), then press and hold the power button of the receiver until you hear one short beep. 4th, Figure 002（or 003）on transmitter LED screen and the receiver light will stop flashing. This indicates that the pairing has been completed.
• If the receiver is damaged or lost during use, for example, if your 002 receiver is lost, then you buy a new receiver and choose 002 pair directly in dog training mode. When the pairing is successful, the new receiver will automatically replace the old receiver.