Product Description
Specifications:
Pipe Length: Approx. 40cm/ 15.7″
Pipe Quantities: 2
Hose Length: Approx. 204cm/ 80.3″
Main Material: Plastic
How to use?
1. Insert the filter basket, then connect the inlet pipe.
2. Connect the two inlet pipes if necessary.
3. Insert the outlet water hose.
4. Press the air-pressing button, start work.
Features:
Air-pressing button: Press air-pressing button a few times to pump out the dirt water.
Glass scraper: Clean the moss and waste on the bottom of the aquarium.
Fixture clamp: Fixed the hose at the edge of the bucket for easy use.
Two pipe: If necessary, extend the two water pipe by the connector to fit a variety of sizes of fish tanks.
Water flow clamp: Adjust the water flow by turning up and down, it’s very convenient and simple.
Filter basket: Prevent blockage caused by large sand and stone from sucking out when pump water.
Package Included:
1 x Air-pressing Button
1 x Glass Scraper
1 x Filter Basket
2 x Inlet Pipes
1 x Outlet Soft Hose
1 x Fixture Clamp
1 x Water Flow Clamp
Product Features
- 【HARMLESS FOR FISH】 Normei fish tank cleaner is no electricity, does not harm to fish due to accidental electric shock, and built-in 3D filter basket in the water inlet prevents the Juvenile fish from being sucked out, which is very safe.
- 【4 IN 1 MULTIFUNCTIONAL】 Water Changing, Sand Washing, Scrape Moss and Absorption of Urine, these are done easily without wet your hands, it’s very helpful for you. And our aquarium gravel cleaner design of anti backflow, It won’t disrupt your plan to clean the fish tank.
- 【FIT FOR ALL AQUARIUM】Fish tank gravel cleaner comes with 2 hard plastic intake pipe(each 40cm/15.7″), which can be connected or independent use, fit for the Max. height aquarium up to 36.2 inch, almost suitable for all different size fish tank.
- 【SIMPLE ASSEMBLY, EASY OPERATION】 Assembled in mere seconds, according to the instructions, connect the inlet and outlet pipe, then pressing the air-pressing button until water coming out. Very easy job!
- 【PLEASE PAY ATTEMTION】 The position of the water outlet must be lower than the inlet position over 50cm when pumping.